Bit Error Test & Arbitrary
Waveform Generation

SHF 12105 A BPG
Choose a selection or scroll down to view all

NRZ and PAM BPG

NRZ and PAM EA

AWG

Mainframes

Support

NRZ and PAM Pattern Generators (BPG)

SHF’s BPG instruments support a vast number of speeds, signal types and channel configurations. By extending the binary generators with our remote heads the data rate, the number of levels or both is increased.

The drop down menu below is supposed to help to find the best fitting instrument configuration for your application. Just load the full data sheet by clicking the product number.

wdt_ID BPG Remote-Head Remote-Head Type Focus Max. Baud Rate Max. Channels Capabilities
1 SHF 12105 A SHF 614 C 6-Bit DAC PAM4 up to 120/128 Gbps 60 1
- PAM-X with up to 60 GBaud
- E.g. 120 Gbps PAM4
- E.g. 60 Gbps NRZ
- Pre-Emphasis
- 60 GSymbols/s AWG
2 SHF 12105 A NRZ up to 60/64 Gbps 64 8
- NRZ up to 64 Gbps per channel
- 2, 4, 6 or 8 channel configuration
- Ideal source for SHF remote-heads
4 SHF 12105 A SHF 616 C PAM-MUX PAM4 up to 256 Gbps 128 2
- PAM4 up to 256 Gbps per channel
- NRZ up to 128 Gbps per channel
5 SHF 19120 C NRZ up to 12.5 Gbps 12 4
- 4 channel BPG
- 2.85 GSymbols/s AWG
6 SHF 12105 A SHF C911 A | 67 4-Bit DAC PAM4 up to 120/128 Gbps 64 4
- PAM-X with up to 64 GBaud
- E.g. 128 Gbps PAM4 per channel
- E.g. 64 Gbps NRZ per channel
7 SHF 12124 A NRZ up to 32 Gbps 32 2
- NRZ up to 32 Gbps per channel
- 2 channel configuration
8 SHF 12104 A NRZ up to 60/64 Gbps 60 4
- NRZ up to 60 Gbps per channel
- 4 channel configuration
9 SHF 12105 A SHF C603 B MUX NRZ up to 120/128 Gbps 128 4
- NRZ up 128 Gbps per channel
- 1, 2, 3 or 4 channel configuration
10 SHF 12124 B NRZ up to 32 Gbps 32 2
- NRZ up to 32 Gbps per channel
- 2 channel configuration
- Both channels are synchronized
11 SHF 12125 B NRZ up to 60/64 Gbps 60 1
- 1 NRZ channel up to 60 Gbps
- Plus 2 NRZ channles up to 32 Gbps
12 SHF 12126 A PAM4 up to 64 Gbps 32 1
- 1 PAM4 channel up to 32 GBaud
- Plus 2 NRZ channles up to 32 Gbps
13 SHF 12104 A SHF C603 B MUX NRZ up to 120/128 Gbps 120 2
- NRZ up 120 Gbps per channel
- 1 or 2 channel configuration
14 SHF 12104 A SHF C911 A | 67 4-Bit DAC PAM4 up to 120/128 Gbps 60 2
- PAM-X with up to 60 GBaud
- E.g. 120 Gbps PAM4 per channel
- E.g. 60 Gbps NRZ per channel

NRZ and PAM Error Analyzers (EA)

By combining the SHF 11104 A EA with a SHF 11221 A DEMUX, the serial data rate is extended up to 120 Gbps per channel. The SHF 11220 A PAM-Sampler enhances the capability for true PAM4 BER measurements up to a speed of up to 58 GBaud PAM4 (112 Gbps).

Just load the full data sheet by clicking the product number.

wdt_ID PN Remote-Head Remote-Head Type Max. NRZ Data Rate Max. PAM4 Baud Rate Application Examples
4 SHF 11104 A 64 32
- NRZ up to 64 Gbps
- PAM4 up to 32 GBaud (64 Gbps)
16 SHF 11104 A SHF 11221 A DEMUX 120 32
- NRZ up to 120 Gbps
17 SHF 11104 A SHF 11220 A PAM-Sampler 64 58
- PAM4 up to 58 GBaud (116 Gbps)

Arbitrary Waveform Generators (AWG)

SHF is offering a cost effective solution housed in a small and light weight chassis (the SHF 19120 C) and a solution based on our BPG-DAC combination. For PAM signals, it is faster than any other AWG instrument as it samples only one single time per each bit. Thus the baud rate of the resulting PAM signal is as fast as the sample rate of the system.

Just load the full data sheets by clicking the product number.

wdt_ID AWG / BPG Remote Head Channels Sample Rate Vertical Resolution Sample Memory
1 SHF 19120 C 3* 2.85 GSa/s 14 bit 1 GSa
2 SHF 12104 A SHF 614 C 1 60 GSa/s 4 bit 1 GSa
3 SHF 12105 A SHF 614 C 1 60 GSa/s 6 bit 8 GSa
4 SHF 12105 A 2x SHF 614 C 2 60 GSa/s 4 bit 8 GSa/channel

* Only one AWG channel accessible at a time. In addition there are four BPG outputs (1… 10.3 Gbps).

Mainframes (to host the Plug-In Modules above)

wdt_ID P/N & Data Sheet Type To host up to
1 SHF 10001 C Small Mainframe Either four half-width plug-ins, or one full-widthand two half-width plug-ins
2 SHF 10000 D Large Mainframe Up to two full-width plug-ins (EA or BPG) and up to four half-width plug-ins (e.g. optical Tx)

Support – BERT & AWG Instruments

Literature

blank

General Info

BERT for Ethernet, OC-768, CEI, InfiniBand and Fiber Channel

SHF’s Bit Pattern Generators (BPG) or Pulse Pattern Generators (PPG), Error Analyzers (EA) and remote heads form a Bit Error Ratio Tester (BERT) suite, which supports a vast number of different applications including high speed Ethernet rates like 100GbE, 200GbE, 400GbE and 1TbE.
The instruments support up to 8 independent channels broadband from < 10 to 64 Gbps. By combining these instruments with our multiplexer (MUX) and demultiplexer (DEMUX) modules, the serial data rate is extended further up to 120 Gbps per channel.
A PAM source is formed by attaching one of our digital-to-analog-converter (DAC) remote heads to the BPG. This way, the fastest commercially available speed on a single serial coaxial interface (128 GBaud / 256 Gbps) is achieved using our PAM-MUX extender head.
SHF’s capability for true PAM4 BER measurements up to a speed of up to 58 GBaud PAM4 (112 Gbps) is also the industries fastest.

Arbitrary Waveform Generation (AWG)

When it comes to signal generation an Arbitrary Waveform Generator (AWG) is the all-in-one device suitable for every purpose in Telecommunication, Optics, Medicine, Radar, Physics or even Quantum Computing.

Application and Tutorial Notes

Application Notes

  • Jitter Analysis using SHF 10000 Series BERT Equipment
    A short description of jitter and a tour of the SHF software used for the measurements. Includes an outline of the theory involved.
  • DQPSK – Bit Error Test Solution
    Provides a general overview of the optical DQPSK, the generic structure of the SHF DQPSK optical TX and RX modules and the application in conjunction with SHF’s 50 Gbps BERT System
  • Skew Control
    This application note describes how the alignment of the output signals from the Pattern Generator SHF 12103A could be adjusted greatly over many bit periods (integer bit delay) and fine-tuned within tenth of a picoseconds (skew control).
  • Multi-Level Signal Generation using the Multi-Channel SHF 12103A
    The objective of this note is to provide a simple guide on how to make the best use of the SHF 12103 A Quad-32, 4-channel 32 Gbps BPG, as a multi-bit data source, to realise 4-level electrical signals when used in conjunction with an external broadband power combiner.
  • Jitter Injection using the Multi- Channel BPG
    This note presents the setup to allow injection of jitter using a SHF Bit Pattern Generator. It demonstrates that SHF BPG’s are jitter transparent, i.e. it correctly transfer jitter from the clock to the data output signal. This enables jitter tolerance tests as required by many telecommunication standards such as 100G Ethernet and 40 GBit/s OTN.
  • Multi-Channel BPG SHF 12103/4 A
    The objective of this note is to provide a reference to illustrate how to make the best use of the truly synchronous features, dual bit rate bands, and multi-channel nature of SHF 12103A and 12104A BPGs. Hardware implementation examples are given towards the realization of many advanced system experiments.

Tutorial Notes

FAQ

blank

What makes a SHF BPG connected to a SHF DAC become a high baud rate AWG?

Because SHF 12104 A and SHF 12105 A Bit Pattern Generators have

  1. multiple high data rate channels,
  2. individually programmable channels and
  3. channel synchronization

one can basically program any required output waveform from a DAC just by programming the input bits into the DAC accordingly.

Our new complementary software package, the SHF Control Center, assists the user to create the user patterns for any signal trace. With our SHF multi-channel BPG the software just needs to know which BPG output is connected to which DAC input and the arbitrary signal can be created.

Above screenshot shows how the GUI is used to configure the multi-channel BPG SHF 12105A with a 6-bit DAC to form a PAM4 waveform with non-equal amplitude eye opening and pre-emphasis for device testing requiring some degree of non-linearity compensation.

How can I create an arbitrary waveform?

There are various options to create the waveform:

  1. Load it from a file
  2. Select from our library and change the parameters according to your needs
  3. Use the graphical sequence editor
  4. Program your waveform in our editor

One more click and the DAC will produce the desired waveform.

What are the benefits of a BPG-based AWG over conventional AWG?

Generally, a Bit Pattern Generator (BPG) has some advantages over an Arbitrary Waveform Generator (AWG):

A. Baud Rate = Sample Rate
BPGs operate very broadband by tuning the input clock frequencies (SHF BPGs work from approximately 5 Gbps up to 64 Gbps). The sample rate of an AWG can be restricted to a narrow band. This becomes particularly critical when data signals (be it NRZ or PAM) are to be produced where the sample rate of the AWG is not an integer multiple of the baud rate of the data signal.
With data signal created by a BPG + DAC architecture, the baud rate and the sample rate can always be identical (1 Sample per Baud), thus no software tricks have to be applied to compensate for fractional sample to baud rate relations.

B. Logical Pattern Generation (No Memory Used)
A BPG can produce some pattern types logically, i.e. not loaded from the memory (most famously, creating NRZ PRBS patterns). This way, the patterns can be very long (up to at least 231-1) and there is no up-load time (which can be quite long for long user defined patterns) as in the case of a conventional AWG relying on user-defined patterns.

In first place one may think that these advantages do only apply to pure BPG and not to an AWG based on a BPG/DAC architecture. For most microwave signals this is correct, however, for some data signals the coding can be done in the BPG hardware, thus the user memory is not used and above advantages do still apply for the signals from the DAC. Some examples are:

1.) Standard PAM
Just by applying standard PRBS signals to the DAC the DAC will create PAM4, PAM8 etc.

2.) Symmetrical unequal PAM4
In case the voltage contribution of the LSB input is exactly half of the voltage contribution of the MSB, the PAM4 signal is fully symmetric, i.e. all three eye heights are the same. This would be the standard setting of the DAC.

If the voltage contribution of the input bits deviates from half, the eye heights won’t be equal anymore. However, it will always remain symmetric. This means, in case the inner eye gets bigger the two outer eyes will be smaller but the two outer eyes will always have the same height. In the SHF DAC GUI, this is defined by the symmetry control.

3.) Non-equal amplitude PAM4
With “non-equal amplitude”, all three eye heights are different. For example, the lowest PAM eye is small, the middle is average and the upper is big (or vice versa). This is quite useful in case the DUT has a non-linear transfer characteristic (e.g. an EA modulator).
With a SHF BPG and a SHF DAC with at least 3 Bits (the more bits you use the finer you can set your different eye heights), the individual level spacing can be set just by a few SHF Control Center clicks as shown below for the case of using a 3-bit DAC.

PAM4 Amplitude Setting

Please note, for this special application, you can leave the BPG in PRBS mode and let the BPG do the recalculation of the patterns in hardware. Thus there are no such AWG drawbacks such as pattern length restriction due to memory size limit, and  waiting time when patterns are uploaded.  Our architecture can do non-equal amplitude PAM eyes with pattern length up to 231-1.

4.) Pre-Emphasis
A pre-emphasis tap can be set up by generating the same data pattern twice with one being inverted and delayed (or advanced) by one bit before the patterns are added together. Delaying and inverting is a simple task for the multi-channel BPG while still being in PRBS mode. Adding together is done by the DAC. Even the amount of the pre-emphasis can be adjusted by varying the contribution of this input into the DAC.
In case enough bits are available at the DAC, this concept can be easily extended to multi-level signals and/or more pre-/de-emphasis taps.
Again, all this is done by simply generating standard PRBS patterns with the BPG and therefore “the AWG drawbacks” do not apply.

Videos

blank

Equalization of PAM4 signals

This interview was taken by “ECOC TV” at our booth at the European Conference on Optical Communication in Dublin.

Video will open on a new page

56 GBaud PAM4 BER analysis

At the ECOC 2018 we showed a live experiment with 56 GBaud PAM4 pattern generation and error analysis. If you missed it, you might like this interview.

Video will open in a new page

PAM signal generation at the ECOC 2017

SHF shows that the SHF 12105 A Bit Pattern Generator (BPG) is specifically designed to be used not only as a conventional 64/120 Gbps BPG but also as a remote head non-interleaved Arbitrary Waveform Generator (AWG) when used in conjunction with the high performance SHF 614 A digital-to-analog converter (DAC).

With this DAC and the SHF 616 A PAM4-Multiplexer we show the generation of various types of high speed (56 GBaud and 112 GBaud) PMA4 signals like PAM with pre-emphasis or PAM with unequal eye openings.

Video will open on a new page

Software

blank

SHF Control Center (SCC)

All parts in our current product range of RF & Microwave Modules and Instruments which are controlled by a software running on an external PC require the SCC to operate (e.g. the SHF 78124 A synthesizer). Some obsolete parts of older vintage, however, may require the BCC.

This SHF software is free of charge for the lifetime of your device. The most current version can be downloaded here.

BERT Control Center (BCC)

The BCC may be required to operate some older vintage obsolete parts of the RF & Microwave Modules and Instruments section.

The most current version can be downloaded here.

Discontinued Products

blank

Discontinued Pattern Generators & Error Analyzers

P/N Type
SHF 11100 A 6 … 50 Gbps Error Analyzer (OC-768)
SHF 11100 B 6 … 56 Gbps Error Analyzer (OC-768)
SHF 11102 A 3 … 28 Gbps Error Analyzer
SHF 11110 A 40 Gbps Error Analyzer (OC-768)
SHF 11122 A 40 Gbps Error Analyzer (OC-768)
SHF 11125 A 2x 32 Gbps Error Analyzer
SHF 12100 A 6 … 50 Gbps Pattern Generator (OC-768)
SHF 12100 B 6 … 56 Gbps Pattern Generator (OC-768)
SHF 12101 A 1.5 … 12.5 Gbps Pattern Generator (OC-192)
SHF 12102 A 3 … 28 Gbps Pattern Generator
SHF 12103 A 32 Gbps Quad- & 56 Gbps Dual-Channel Pattern Generator (BPG)
SHF 12110 A Multi-Band Bit Pattern Generator (OC-768)
SHF 12122 A Multi-Band Bit Pattern Generator (OC-768)

Discontinued Optical Transmitters

P/N Type
SHF 5003 DPSK E/O DPSK Transmitter
SHF 5003 RZ RZ/NRZ Optical Transmitter
SHF 5003 NRZ 50 GBit/s Optical Transmitter
SHF 46100 A E/O conversion module
SHF 46120 A ASK Optical Transmitter (E/O Converter)
SHF 46120 B ASK & PAM Optical Transmitter (E/O Converter)
SHF 46120 C ASK & PAM Optical Transmitter (E/O Converter)
SHF 46121 B ASK & PAM Optical Transmitter (E/O Converter)
SHF 46121 C ASK & PAM Optical Transmitter (E/O Converter)
SHF 46123 A ASK & PAM Optical Transmitter (E/O Converter)
SHF 46210 B 40 Gbps Optical multiformat DPSK Transmitter (E/O Converter)
SHF 46210 C 40 Gbps Optical multiformat DPSK Transmitter (E/O Converter)
SHF 46211 A 10 Gbps Optical multiformat DPSK Transmitter (E/O Converter)
SHF 46212 A 40 Gbps Optical Duobinary Transmitter (E/O Converter)
SHF 46213 A 40 Gbps DQPSK Optical Transmitter (E/O Converter)
SHF 46213 C 40 Gbps DQPSK Optical Transmitter (E/O Converter)
SHF 46213 D QPSK and QAM Optical Transmitter (E/O Converter)
SHF 46214 C 100 Gbps DQPSK Optical Transmitter (E/O Converter)
SHF 46214 D 110 Gbps DQPSK Optical Transmitter (E/O Converter)
SHF 46215 A 128 Gbps DP-QPSK Optical Transmitter (E/O Converter)
SHF 46215 B 132 Gbps (DP-QPSK) and 264 Gbps (DP-QAM) Optical Transmitter

Discontinued Optical Receivers

P/N Type
SHF 5008 DPSK O/E DPSK Receiver
SHF 47100 A Optical Receiver
SHF 47100 B Optical Receiver
SHF 47210 A 39.8 to 43 Gbps DPSK Receiver w. single ended output
SHF 47211 A 9.9 to 10,8 Gbps DPSK Receiver w. single ended output
SHF 47214 A 48 to 55 Gbps DPSK Receiver w. single ended output
SHF 47215 C 26 to 30 Gbps DPSK Receiver w. single ended output

Discontinued 10000 Series Mainframes

P/N Type
SHF 10000 B Large Mainframe
SHF 10000 C Large Mainframe
SHF 10001 A Small Mainframe
SHF 10001 B Small Mainframe

Discontinued Amplifier Instruments

P/N Type
SHF 58211 A Dual Amplifier
SHF 58214 A Multi-Channel Amplifier
SHF 58215 A Multi-Channel Amplifier

Discontinued Arbitrary Waveform Generation Products

P/N Type
SHF 19120 A 2.85 GSa/s AWG + 4x 10.3 Gbps BPG
SHF 19120 B 2.85 GSa/s AWG + 4x 10.3 Gbps BPG